How to Clean a Jura Coffee Machine

To clean your Jura coffee machine effectively, you’ll need to run a cleaning cycle at least monthly using genuine Jura tablets. Start by powering down the machine, removing all components like the water tank and drip tray, and cleaning loose grounds with a brush. Then initiate the cleaning program by pressing “P” followed by “Start,” insert a cleaning tablet in the funnel cover, and let the 30-minute cycle complete its three phases. Between deep cleanings, wipe down the exterior daily, clean the grinder weekly, and descale every three months. Uncover how proper maintenance can extend your machine’s lifespan and enhance your coffee’s flavor.

Key Takeaways

• Run the cleaning cycle monthly using genuine Jura cleaning tablets to remove coffee oils and residue effectively.
• Power down the machine, remove components like the water tank and drip tray and brush loose grounds before cleaning.
• Start cleaning by pressing “P,” insert the tablet in the funnel cover, and complete the 30-minute automated cleaning cycle.
• Clean the grinder weekly with a brush and maintain the milk system to prevent clogs and residue buildup.
• Descale machine every three months to prevent mineral buildup and replace milk pipes for optimal performance.

When to Clean Your Machine

A well-maintained Jura coffee machine requires regular cleaning to guarantee peak performance and great-tasting coffee.

You’ll need to perform a cleaning cycle at least once every month, though you shouldn’t rely solely on the machine’s default settings, which may not prompt you frequently enough for domestic use.

Your cleaning schedule should align with how often you use your machine, as coffee residue can build up quickly and affect the flavor of your beverages.

If you’re noticing any changes in your coffee’s taste, it’s time to run a cleaning cycle using Jura’s 3-phase cleaning tablets.

Don’t forget about descaling, which is just as essential as regular cleaning.

You’ll need to adjust your machine’s water hardness setting to match your local water conditions, as the factory default of 16 degrees might be too low for your area.

Using Jura’s 2-phase descaling tablets will effectively remove limescale without damaging your machine’s internal components.

If you neglect descaling, you risk complete system blockage, which can be costly to repair.

For optimal maintenance, experts recommend descaling every three months to prevent mineral buildup and ensure consistent brewing quality.

Essential Cleaning Supplies

To properly clean your Jura coffee machine, you’ll need several essential supplies that work together to maintain peak performance.

At the heart of your cleaning arsenal are Jura cleaning tablets, which are specifically designed to dissolve coffee oils and prevent mineral deposits throughout your machine’s internal components. While Jura’s own tablets are excellent, you’ll find that Caffenu Triple Action tablets are also compatible with most models.

Cleaning Tools

You’ll need a dedicated cleaning brush to tackle coffee grounds and residue in the brewing unit and grinder. This essential tool helps you reach tight spaces and prevent clogs that could affect your machine’s performance.

Additional Supplies

Keep a soft microfiber cloth handy for wiping down your machine’s exterior, as it’s gentle on surfaces while effectively removing stains and spills.

You’ll also want to have a container ready for collecting waste water during the cleaning process, which makes it easier to dispose of cleaning residues and prevents messy spills.

Regular use of these supplies guarantees your Jura machine stays in prime condition, providing the perfect cup of coffee every time.

The DeLonghi EcoDecalk Descaler offers an eco-friendly alternative for removing stubborn calcium deposits in coffee machines.

Pre-Cleaning Setup Steps

Proper preparation is vital before cleaning your Jura coffee machine. Before you begin the cleaning process, you’ll need to power down your machine and unplug it from the electrical outlet for safety.

Remove all removable components, including the water tank, drip tray, and any remaining coffee beans from the hopper.

For best cleaning results, follow these important steps that’ll protect your investment:

1. Thoroughly rinse and empty the drip tray to eliminate coffee residues that could affect cleaning performance.
2. Access the brewing unit by opening the front door, then use a cleaning brush to remove loose grounds.
3. Place a container beneath the coffee spout to catch any water or cleaning solution during the process.

Before initiating the cleaning cycle, you’ll want to verify that your machine has reached its cleaning threshold, typically after 180 preparations or 80 rinses.

Check that you’ve got genuine Jura cleaning tablets on hand, as using unauthorized products could damage your machine.

Position your coffee maker on a stable surface, and verify you’ve reviewed your specific model’s manual for any unique cleaning requirements.

Regular maintenance every 2-3 months helps prevent harmful calcium deposits from building up in your machine.

Running the Cleaning Program

Once you’ve completed the setup preparations, initiating the cleaning program on your Jura coffee machine requires following a specific sequence of button presses. Begin by pressing the “P” button, then click “Start” to activate the program, and continue pressing “Next” until you’re prompted to empty the grounds container.

Step	Action	Duration	Key Points
1	Insert Tablet	30 seconds	Open funnel, add tablet, close securely
2	Initial Rinse	5 minutes	Water flows through spout
3	Main Cleaning	20 minutes	Don’t interrupt the cycle
4	Final Rinse	5 minutes	Removes cleaning residue

When you reach the tablet insertion prompt, open the funnel cover at the back of your machine and insert one Jura or Solute cleaning tablet. After closing the cover securely, press “Next” to begin the automated cleaning cycle. The machine will now run through multiple cleaning phases over approximately 20 minutes, during which water will circulate through the internal components. Once complete, you’ll need to empty the grounds container and drip tray one final time before resuming normal operation. Regular cleaning helps maintain the optimal performance and longevity of your premium coffee maker.

Maintenance Between Deep Cleanings

While deep cleaning cycles maintain your Jura’s internal components, daily and weekly care tasks keep your machine running smoothly between major cleanings.

You’ll want to establish a routine of wiping down the exterior, checking water levels, and cleaning the coffee spout to prevent residue buildup.

Your weekly maintenance should focus on the grinder and milk system, as these components directly impact your coffee’s quality.

Use a cleaning brush to remove coffee oils from the grinder, and follow your machine’s manual for proper milk system cleaning protocols.

Consider using a conical burr grinder for optimal consistency when grinding fresh beans for your Jura machine.

Here are three essential maintenance habits that’ll protect your investment:

1. Clean the brewing unit daily with a gentle brush to prevent coffee grounds from compacting.
2. Empty and rinse the drip tray after every few uses to avoid overflow and staining.
3. Inspect the water tank weekly for mineral deposits that could affect performance.

Between monthly deep cleanings, you’ll need to monitor the CLEARYL filter status and replace the milk pipe every three months.

Remember to use only original JURA cleaning products to protect your machine’s sensitive components and maintain peak brewing performance.

Frequently Asked Questions

Can I Use Generic Cleaning Tablets Instead of Jura Brand Tablets?

You shouldn’t use generic tablets in your Jura machine. They can damage internal components, void your warranty, and may not dissolve properly. Stick with Jura or Solute-approved cleaning tablets.

What Happens if My Cleaning Cycle Gets Interrupted by a Power Outage?

If your cleaning cycle’s interrupted by a power outage, you’ll need to restart the entire cycle once power returns. Don’t use the machine until you’ve completed a full cleaning cycle.

Why Does My Machine Smell Strange After Cleaning?

Your machine’s strange smell likely stems from residual cleaning chemicals, incomplete rinsing, or leftover coffee oils. Make sure you’re using JURA-approved products and running enough rinse cycles after cleaning.

How Do I Clean the Fingerprint Marks off the Machine’s Display Screen?

Use a soft, dry microfiber cloth to wipe fingerprints off your display screen. If needed, slightly dampen the cloth, but avoid harsh chemicals. Always turn the machine off first.

Should I Run an Extra Rinse Cycle After the Cleaning Program Finishes?

You don’t need to run an extra rinse cycle after cleaning. JURA’s integrated cleaning program includes thorough rinsing phases to remove cleaning agents and residue, making additional rinses unnecessary.